Flower printed blind

Made-to-measure printed designer roller blind, printed and made to your specifications for a truly spectacular effect for your window.

PLEASE ENTER YOUR MEASUREMENT IN ‘MM’ IN THE BOX TO THE RIGHT TO GET AN INSTANT QUOTE.

A beautiful made-to-measure personalised printed designer roller blind, printed and made to your specifications for a truly spectacular effect for your window. Made from either Raffa Canvas or PVC backed fabric for a blackout effect. Blinds come with white metal brackets, and white plastic fittings. (Does not come with screws or plugs).

PLEASE ENTER YOUR MEASUREMENT IN ‘MM’ TO GET AN INSTANT QUOTE.

Our digitally printed Roller Blinds make a stunning addition to any home or office environment. Manufactured to the highest technical specification, our printed Blinds are custom made to order using quality components and a stain finish. Have your own photo printed on a blind or use one from our library.

Measuring for Inside Recess Fitting

Before taking your measurements please ensure that the recess has no obstructions that may prevent your blind from hanging freely or from fully covering the glass (for example window handles or part tiled walls).

Using a metal tape measure take 3 separate measurements across the width (A-B) and down the drop (C-D). Record the SMALLEST measurement on the width and on the drop.

From those 2 dimensions we will manufacture your blind so that it fits perfectly inside the recess.

Measuring for Fitting Outside the Recess

Measuring for fitting outside the recess is done in a slightly different way.

Decide how much overhang you would like across the width of the opening and down the length. As a minimum we recommend allowing 5cm on each side and at the top and bottom to ensure your opening is fully covered. Of course if you would like to allow more that is fine.

Take measurements E-F and G-H (as shown in the diagram) in line with your desired overlap. Record them both.

Please be aware that if you require a roller blind the fabric will cover approximately 3.5cm less than the overall width measurement taken due to the holding brackets, so please allow for this when taking your measurements.